Alarm Feature Request

I am coming from an IQ Panel setup via Alarm.com. When ring added support for Z-wave devices, this prompted me to make the switch. I have 2 request that are not currently supported with ring, while everything else moved over seamlessly from the other system.

  1. **Sensor Notification Schedule - ** The ability to set a time range that you receive push notifications to your device when a sensor is tripped. Example: Have the sensor on my sliding door notify me between the hours of 11PM to 7AM. I had this set up (IQ PANEL SYSTEM) If for some reason my kids got up at night and ever tried to go outside, it sends a notification. I have no need to get a notification every time a door opens or closed all day long, so it would be nice to not have to completely disable the notifications, but rather create a schdule.
  2. ** Z-Wave Light Switch Schdule -** The ability to have the lights that are controlled by a Z-wave swith go ON and OFF to a set schdule through the app. Its crazy this doesnt exist. I understand there is a work around to use Alexa to create a routine to do this, but this seems like something that should be available directly through the alarm device itself.
9 Likes

Is it possible to add additional sounds to use for contact sensor tripping? For example “Front Door Opened”, “Front Door Closed”, etc. as opposed to just a simple sound.

13 Likes

This is possible now if you have Alexa devices but not natively supported though the ring alarm.

1 Like

I would like to have an option on the keypad to always illuminate the alarm status led (disarmed, home, away), even if on battery power. It would be just as useful and use less power if it did this only in one of the armed states.

I want to do this so that my family can more readily see the alarm status without walking all the way across the house. It’s convenient to glance at the keypad before opening a door to walk the dog without setting off the alarm or glancing to see if someone else has set the alarm for the night.

The powered mode provides this experience, but it isn’t always practical to hardwire, or the look of hardwiring might not be desirable in all situations.

9 Likes

I would like to have an option for my Ring cameras to only record motion events when the alarm is armed. I want to choose which cameras are included and in which modes the cameras will record motion.

This brings me several benefits that might lead me to buy more cameras. First, from a privacy perspective I’m not interested in recording my family walking the dog, swimming in the pool, grilling dinner, or generally living our life. However, if the alarm is armed and someone comes near those same entrances I definitely want them recorded. I might even put a camera inside if it’s only recording when armed explicitly in away mode. Second, we should save a lot of battery because we won’t be recording ourselves in the act of daily living all the time. When the alarm is armed there will be far fewer events recorded from our routine coming and going leading to longer times between charges and a lower effort experience overall.

14 Likes

****We need the ability to enter in a panic 4-digit distress code that would “disarm” Ring but alert authorities. Most home security systems have this. This should be integrated with Alexa as well so the fake code could be audibly used with Alexa to “disarm” Ring.

Also, as most folks have stated we need to be able to hear chimes through the keypad. Of course folks have to realize this will diminish battery life.

Where is glass breakage sensor’s???

There should be hardwired terminals on the back of the keypads to be able to run off ac if wires are available from a previous system; not Just mini USB

19 Likes

Hello,

I would like to be able to set different sounds for notifications sent to my iPhone from the Alarm app. As of now, when the alarm is set or disabled the sound is the same generic sound of other notifications for 3rd party apps.

The “Neighbors” settings has options to do this but not the Alarm settings.

Thank you.

4 Likes

Hey @YK2000 , I’ve moved your request over to this board as it is Alarm related. This feature is in high demand! We will definitely share with the team to reinforce the value of this request. Thank you!

Hi there, when we are home we usually keep the ring security system in Home mode. If I want to leave the house while the rest of my family is still at home I need to disarm and then re-arm the system in home mode.

Feature request: While the system is armed in home mode if I the keypad I enter my passcode and then hit the arm home button that would give me 30 seconds to leave and then automatically rearm the system in home mode.

9 Likes

I like to see a few additions and changes to make the ring alarm better and more comparable to outher comercial systems.

  1. option for alarm system to have voice notifications like; “front door open” and “front door closed”.
  2. Inrease the number of sounds for when you like to have sound and not voice. The current selection of 4 sounds is very limited.
  3. Include MQTT (mosquitto) so that the alarm system has the capability to play nice with home automation systems. MQTT will allow the system to share sensor/system state with home automation systems, and if implemented propperly also allow home automation systems to arm/disarm. MQTT is very universal and almost every commercial and freeware project supports this.
  4. Create a multi sensor input module to allow connection of hard wired sensors in a house. This will make it easier for people to switch from their existing hard wired system to the ring alarm
10 Likes

Thanks for these suggestions @guijtjes! I went ahead and moved the post to the Alarm Feature Request board for better tracking. Thanks!

@Gsxr wrote:
Hi there, when we are home we usually keep the ring security system in Home mode. If I want to leave the house while the rest of my family is still at home I need to disarm and then re-arm the system in home mode.

Feature request: While the system is armed in home mode if I the keypad I enter my passcode and then hit the arm home button that would give me 30 seconds to leave and then automatically rearm the system in home mode.

This! But silently (or at least an option to silently arm) so i dont wake everyone when leaving

5 Likes

Just installed Ring Security System this week and am really impressed so far.

I do do have a couple of features that I think would be a great improvement.

  1. an option to silently arm the system (no loud countdown).

  2. The green battery light on the keypad in my bedroom is way too bright for a darkened room.

Thanks!

Debbie

6 Likes

Thank you for sharing! I’ve moved this over to the feature request thread to ensure it makes it to our engineer team. We love hearing everyones wishes, and sharing them with the team, keep 'em coming!

1 Like

Any way to keep the Red circle lit when it is armed. Just looks intimidating through the front room window and I feel it could be a great deterrent.

6 Likes

Please give us the option change to arming sound. It’s important to have one as an audio reference however, It sounds like a bad 80’s horror movie.

Additionally, an extra customizable mode would be great.

5 Likes

Please work on integrating playing sounds between products.

  1. We need something other than the base station that will play door open sounds. (Keypad, Chime, Dome Siren)

  2. It would be nice to use existing products instead of a Chime for doorbell sounds (Keypad, Base Station, Dome Siren)

12 Likes

Hey,

As many mentioned… Night mode or an additional mode would be huge.

6 Likes

This is about the app for Ring Alarm system. I’m liking it a lot so far, but I’m coming from an Alarm.com product and feel like the Ring app is missing a couple of nice features:

  1. Android widget for quickly arming/disarming the system

From the home screen, I would like to one-tap set the alarm as I’m on the way out the door instead of loading the Ring app, waiting for the base station connect and tapping the button. Not critical, but a nice convenience. (In iOS, these would be available as notification center widgets.)

  1. Toggle switches for Z-Wave devices on the dashboard

Right now, it’s difficult to turn on/off Z-Wave lights from the app. It’d be better if all light switches were accessible right from the dashboard in the Ring app (and possibly add widgets for them, as in the previous suggestion)

Thanks! --Bryan

5 Likes

@EsEsEs wrote:
Hey,

As many mentioned… Night mode or an additional mode would be huge.

Night mode would be amazing to eliminate the entry delay. I dont want to wait 60 seconds from the time a burglar is through my window before the siren goes off. When im sleeping, if a door or window is opened i want sirens

5 Likes