cancel
Showing results for 
Search instead for 
Did you mean: 

Enhance Existing "Snooze motion on all cameras" Feature

Enhance Existing "Snooze motion on all cameras" Feature

  1. Extend the maximum duration from four hours to 12 hours (default "2 HRS" for backwards compatibility).
  2. Add a "Record Motion" slider (default "on" for backwards compatibility). This would allow us to (optionally) stop recording motion for the specified duration on all cameras. 
  3. Add a "Light Motion" slider (default "on" for backwards compatibility). This would allow us to (optionally) disable the light motion zones for the specified duration on all cameras. 
  4. Add a "Motion Alerts" slider (default "off" for backwards compatibility).   This would allow us to (optionally) disable motion notifications for the specified duration on all cameras.

Enhance "Snooze motion on all cameras" Mockup 

54 Comments
New Neighbor
When in disarm mode, I want both the motion detection and light detection disabled for my floodlight cam.

When we are sitting outside In the garden, the floodlight cam is always switching on/off when there is any movement. Sure, I can change this by setting the light detection to off (by reducing the light detection zone to zero). However when we go to bed, I want both the light detection and motion detection to be on - and don’t want to have to go into device settings each time to change the sensitivity of the light detection.

It seems like the simplest solution would be to ensure that when I select the disarm mode both the light detection and motion detection is disabled. However this doesn’t work. How therefore can I achieve the outcome whereby when we are using the garden at night the floodlight cam doesn’t keep switching on and off - yet while we are going to bed both the motion and light settings can be set to trigger when any movement is detected?
New Neighbor
When in disarm mode, I want both the motion detection and light detection disabled for my floodlight cam. When we are sitting outside In the garden, the floodlight cam is always switching on/off when there is any movement. Sure, I can change this by setting the light detection to off (by reducing the light detection zone to zero). However when we go to bed, I want both the light detection and motion detection to be on. It seems like the simplest solution would be to ensure that when I select the disarm mode both the light detection and motion detection is disabled. However this doesn’t work. How therefore can I achieve the outcome whereby when we are using the garden at night the floodlight cam doesn’t keep switching on and off - yet while we are going to bed both the motion and light settings can be set to trigger when any movement is detected?
New Neighbor

I also beg Ring to improve this feature. I had requested it a long time ago and was glad to see they implemented, but as noted in several posts, there is room for improvement. My biggest issues include:

 

a) Chimes are not snoozed as well

b) Other user devices, such as my wife's phone, is not snoozed

 

Thus, if the feature can be expanded to include other devices, I would be ecstatic! I also reviewed the use of the Modes feature, but it doesn't quite solve the concern I have in my opinion. I have the system setup the way I want when it is disarmed and we are home. I want motion detection and chime alerts under that scenario. However, I want to be able to go outside and work in the yard or have the kids play in the driveway, snooze the system, and know that it will automatically return to normal behavior after a designated amount of time. Should be stratight forward to update the Snooze All option.

New Neighbor

I have a further recommendation... As the original post suggested, there would be defaults on multiple aspects of the Snooze All feature. However, why not give the user, through the app, the ability to customize their own default settings for this feature. Then, accessing this feature via the app could be done with a single click, knowing all the user custom defaults were applied. If the user wanted to customize the settings for a single occurrence, the app could utilize the long press or deep press feature of most smart phones to trigger additional options.

New Neighbor
Floodlight cams would benefit from Light Snooze Feature to temporarily disable light activation for a period of time. Disabling and enabling lights is a poor solution. Forgetting to enable lights presents a security concern. Thank you!
New Neighbor

I mocked this up,

Enhance "Snooze motion on all cameras" Mockup 

Refer to this new feature request .   This would allow you to snooze any combination of motion alerts, recording and/or lights.  As with the existing "Motion Snooze" functionality, this could be applied to all devices or on a per-device basis.  If you like my mockup / new feature request, please give it a thumbs-up (kudos).  Thank you!

New Neighbor

Looks great- let's hope Ring can get it done!

New Neighbor

This is an essential feature that needs to be added. Not sure why Ring hasn't done this. 

New Neighbor

Please Ring - this is a much needed feature!

New Neighbor

Sometimes I like to take walks in the evening and not want to set off the flood light.  Now we have to drill down deep into menus change settings/save just to snooze the floodlight.  As mentioned above would be nice to have quick access button to snooze the floodlight. Not to mention I sometimes forget to turn it back on.

Thanks